˂
˃
-
Box changer Sugiyama CS-860
- Product code: Sugiyama CS-860
-
• Maker: SUGIYAMA
• Make in: Japan
• Prices: Please call
Description
Box changer CS-860-2 is a device of the press product that puts the box and does the calculation of the product and the clearing work of the box by work. In the method using a past pre-set counter, it was necessary to stop the press device when the counter reaches the preset value, and to reactivate by the manual operation. In reactivation by the manual operation, the press device remains stopping if there is no worker to be near. Therefore, utilization rates decreases.CS-860-2 is equipped with the counter for the box exchange. Boxes can be exchanged without stopping the press device when using it together with a special shutter or the belt conveyer. Moreover, press-interlocking has the function to reactivate though the press device is stopped at the box exchange. It is possible to save labor by these functions, and, in addition, the press device can be driven in high utilization rates.
Features
The size of the box can be freely designed.
|
It is small and lightness.
|
The shutter has the sensor.
|
Operation monitoring function.
|
Multifunction.
|
Dimensions
CS-860-2SSH
CS-860-2H
/ CS-860-2SSH
CS-860-2SSH+100(long version)/ CS-860-2SHA
Specification
| Range that can be handled | |
| Size of box | Width 300 ~ 670 mm (Direction of clamping) Length 200 ~ 420 mm (Feed direction) Height 100 ~ 235 mm (300 mm max. *When you use the option) |
| Weight when empty box is piled | 15 kg (max.) |
| Weight when product enters box | 15 kg (max.) (The weight of the box is contained) |
| Shutter | |
| Size of shutter open mouth | 230 * 145 mm |
| Sensor sensitivity | 4 mm in diameter globe corresponding (sensitivity setting possible) |
| Controller | |
| The value of the count is memorized | There is a backup. |
| Storage hold time | 15 days or more (In five hours) |
| Conveyer control output | Under 2 A The output voltage depends on the power supply. |
| Stop output relay | AC240 V / DC30 V 2 A Transfer point of contact |
| Supplementary output | SSR (AC240 V 0.5 A) / relay (AC240 V / DC30 V 3 A) |
| Power supply for sensor | DC12 V 0.2 A |
| Others | |
| Weight | 45 kg |
| Power supply | AC100 V +/-10% 50/60Hz 0.3A |
| Supply air pressure | 500 ~ 900 kPa (5 ~ 9 kgf/c㎡) |
| Ambient operating temperature | 0 to 55 degree C No sudden temperature change during the use. |
| Ambient operating humidity | 35 ~ 85% RH (non condensing) |
| Ambient operating atmosphere | Free of corrosive gas, dust |
| Attachments | Main body of CS-860-2 (Specify shutter or shooter’s presence.) Output cable(3 m) Instruction manual |
Products in this Category
