Contact Us

T20 DIMAC T20 DIMAC In the model of 3.2mm maximum material thickness, you can choose from two types of width. T20 / T30 is equipped with a C-type frame. workpiece can be supplied from the machine front. T20 DIMAC T Series Quantity: 1 cái
T20 DIMAC
˂
˃
  • T20 DIMAC

  • Product code: T20 DIMAC
  • In the model of 3.2mm maximum material thickness, you can choose from two types of width. T20 / T30 is equipped with a C-type frame. workpiece can be supplied from the machine front.


For basic specification, prease refer below table.

  T20
Limit of Matrial Max. Width  200mm
Max. Thickness 3.2mm
Max. Stamp Speed 200spm
Material Feeding Method Roller + Servomotor
Feed Length 999.99mm Max.
Adjusted by 0.01mm unit.
Feed Speed Automatic calculation *1
Standard Load
Width / Thickness
Coil Mode
 50/3.2mm
200/1.6mm
Standard Load
Width / Thickness
Sheet Mode
 200/3.2mm
MAX Feeding material weight 15kg
Material Pressing Method Spring
Pressing Capacity 1700N
Adjusted by screws.
Material Releasing Method Air Cylinder
Sheet Mode Press shoot count MAX 999
1 unit setting
Discharge Length MAX999mm
1mm unit setting
Required Power Supply Three phase or single phase 
200V±10%, 50/60Hz
Product Weight  Feed side (with controller)48kg
Pull side 46kg

*1 Calculated by the press rotational speed settting and the feed angle setting.
Products in this Category
 
You did not use the site, Click here to remain logged. Timeout: 60 second