Cutting counter Sugiyama PS-321

Tiếng Việt

English

Japanese

˂

˃

Cutting counter Sugiyama PS-321
Product code: Sugiyama PS-321
• Maker: SUGIYAMA
• Make in: Japan
• Prices: Please call

Product information

Description
Cutting counter PS-321 is designed to produce and output control signals from the Count input signal. The control signals are produced based on the Count cycle.
Features

Three forms of Count modes

You can select three forms of Count modes by pushing buttons on the front panel.
In the Count mode 1, two channels operate independently.
In the Count mode 2 and 3, output is controlled by two setting values for one Counter.

Easy-to-change Count values by panel operation

Without applying Count signals, you can change the Count value by the front panel operation.

Prohibition of unnecessary operations

PS-321 has the operation prohibition function to prevent errors in operations.

Independent SSR and open collector output

Each channel has SSR and open collector output. Four outputs or less are available.

Variety of output forms

You can select out of 4 output forms in the Count mode 1 and 15 forms in the Count mode 2/3.You can select them by the device setting.
SSR and open collector can be set separately.

Counter control functions such as Count interruption and Count reset

In the Count mode 2/3, the Count input 2 can be also utilized as a Counter control input.

Built-in SSR for output

ACSSR or DCSSR for output can be installed. To replace SSRs, remove the back panel. Use the SSR specified by Sugiyama Electric System Inc.

Remote control available (OPTION)

Most operations can be remotely controlled by commands from such devices as the programmable controller. However, optional settings are required.

Dimensions

PS-321

PS-321

PS-321 Dimensions

Specification

Count digit	3 digit
Max Count speed	200 CPS
Count channel number	2 (Count mode 1) 1 (Count mode 2, 3)
Output form	4 (Count mode 1) 15 (Count mode 2, 3)
DCSSR	DC30 V 500 mA max.
ACSSR	AC240 V 1 A max.
Open collector	DC30 V / 100 mA max.
Power supply voltage	AC100 ~ 240V +/-10% 50/60Hz
Power supply Consumption	15 VA max.
Weight	Body 2.8 Kg (inc. mounting brackets)
Ambient operating temperature	0 to 55 degree C No sudden temperature change during the use.
Dimensions(WHD)	200 * 98.5 * 184 mm (An umbo is not included.)
Attachments	Output cable (Standard: 5 m) Instruction manual ACSSR (It is possible to exchange it for DCSSR.) *It has installed it internally.

Products in this Category

Product code: PS731

PS-731 ~Digital cam~

Product code: PS-711