T30 DIMAC - NC Twin Roll Feeder

˂

˃

T30 DIMAC - NC Twin Roll Feeder
Product code: T30
In the model of 3.2mm maximum material thickness, you can choose from two types of width. T20 / T30 is equipped with a C-type frame. workpiece can be supplied from the machine front.

For basic specification, prease refer below table.

		T30
Limit of Matrial	Max. Width	300mm
Limit of Matrial	Max. Thickness	3.2mm
Max. Stamp Speed		200spm
Material Feeding	Method	Roller + Servomotor
	Feed Length	999.99mm Max. Adjusted by 0.01mm unit.
	Feed Speed	Automatic calculation *1
	Standard Load Width / Thickness Coil Mode	50/3.2mm 300/1.6mm
	Standard Load Width / Thickness Sheet Mode	300/3.2mm MAX Feeding material weight 15kg
Material Pressing	Method	Spring
Material Pressing	Pressing Capacity	1700N Adjusted by screws.
Material Releasing Method		Air Cylinder
Sheet Mode	Press shoot count	MAX 999 1 unit setting
Sheet Mode	Discharge Length	MAX999mm 1mm unit setting
Required Power Supply		Three phase or single phase 200V±10%, 50/60Hz
Product Weight		Feed side (with controller)56kg Pull side 54kg

*1 Calculated by the press rotational speed settting and the feed angle setting.

Keyword: in the, model of, 3.2mm maximum, material thickness, you can, choose from, two types, of width, t20 t30, is equipped, c-type frame, workpiece can, be supplied, from the, machine front, with

Products in this Category

Product code: T20 DIMAC